The third-order non-linear optical properties of glazing is progressing

Recently, Prof. Jun Wang from the Key Laboratory of Strong Laser Materials of the Chinese Academy of Sciences, Shanghai Institute of Optics and Fine Mechanics, made progress in the study of the third-order nonlinear optical properties of MoS2 / carbon nanotube nanocomposites with core-shell structure. Relevant research was published in the Chemistry A European Journal (Impact Factor 5.83) and was selected by the journal as the cover page.

The unique structure and nonlinear optical properties of 2D materials make these materials potentially useful in the fields of nanophotonics such as mode-locked, Q-switched, optical limiting, and optical switches. Two-dimensional transition metal sulfide (MX2, M = Mo, W, etc., X = S, Se, Te) due to its semiconductor properties and strong exciton binding effect, as well as the band gap dependence of the number of layers, The widespread concern. However, due to the non-linear optical properties of a single transition metal sulfide, it is still unable to meet the needs of the device, making the nonlinear optical properties of the material by forming heterostructures become hot spots.

In this work, MoS2 nanosheets were grown in-situ by one-step solvothermal method on one-dimensional carbon nanotubes (CNTs). The MoS2 / CNTs nanocomposites with core-shell structure were obtained. Linear light modulation behavior. The study found that for the femtosecond pulsed laser, due to the charge transfer, the nanocomposite allows the light to pass first, and then blocks the light transmission, showing the transition from saturated absorption to optical limiting. For the nanosecond pulsed laser, There is a strong thermal-induced non-linear scattering effect, which nanocomposite exhibits optical confinement behavior. Studies have shown that the third-order optical nonlinearity of the composite is significantly improved compared to a single MoS2 or carbon nanotube.

Lift plateform can be different types, aerial work platform, Scissor Lift, manual lift plateform, etc. Weihua is a leading lifting equipment manufacturer in China and provide all kinds of hoisting and mateiral handling soulutions.

The most commonly seen Lift Platform is the scissor lift. Scissor Lift Platform is a kind of multifunctional aerial working lift platform fitted on fixed bases and movable bases i.e. rubber tire vehicle. We have various types of lifting platforms with features of light weight, big capacity, self-propelled, electric starting, self-supported, large working range and simple operation, which can carry out 360 degree aerial work crossing obstacles. Each type of lifting platform can be equipped with an outreach support which can extend 800mm to 1000mm.

Power supply: AC 380V or AC/DC 220V or other

Drive: engine power, manual power, manual / electric dual-use.

Weihua is a China leading lifting equipment manufacturer with 31 years experience. You can find our products all over China, also in 110 countries such as the UK, Russia, USA, Thailand, Ukraine, Egypt, Mexico, Pakistan, Malaysia, etc. We have confidence to provide you with the right products and professional solutions. Just let us know your needs.

Lift Platform

Platform Lift,Scissor Lift Platform,Vertical Platform Lift,Rubber Tire Scissor Lift

Henan Weihua Heavy Machinery Co., Ltd. , https://www.hoistcrane.nl