Application of High Temperature Heat Pump in Electroplating Plant Thermostat

Application of High Temperature Heat Pump in Electroplating Bath Thermostat I. Present Situation of Electroplating Factory 1. The electroplating factory now heats the cleaning solution of electroplating solution and parts, accounting for 20% -30% of the electroplating factory's total electricity. 2. Now electroplating heating methods are the following: A, small factories generally take electric heating B, medium-sized factories generally take boiler heating C, large enterprises generally use steam heating 3. After plating parts drying generally take electric heating Drying boxes, oil drying lines or steam drying lines. Second, Yong Gan high-temperature heat pump solutions: 1, the use of high-temperature air source heat pump, on the one hand to provide high temperature hot water 80 ℃ ~ 85 ℃, on the other hand heat pump exhaust can be introduced into the workshop for the workshop to provide fresh cold air, Workshop ambient temperature, improve the working environment of employees. 2, after plating parts can be high temperature air source heat pump for drying, parts drying at low temperature will not cause some plastic parts deformation and aging, to avoid damage to the product. 3, using high-temperature heat pump technology can reduce the plating costs per unit of product. Relatively calculated, the operating cost is electric heating 1/4, 1/3 of the cost of fuel, while improving the safety of production. High-temperature heat pump can effectively provide high-temperature hot water at 85 ℃ plating bath for the daily bath insulation, high-temperature heat pump exhaust outlet temperature stability at 20 ℃ -25 ℃, the exhaust recovery, the introduction of the workshop, the workshop can provide fresh Of the air-conditioning, lower workshop temperature, improve the workshop air quality, enhance the working environment. After plating parts can also use high temperature air source heat pump dehydration drying. The use of high-temperature heat pump technology can reduce the cost of electroplating, electrical heating is about a quarter of the cost of heating the equivalent of 1/3 the cost of fuel.

The Far Infrared Heater has many advantages, such as:

1,Comfortable heating

2,Speedy heating
3,Double energy saving up to 50%
4,Safe heating and long service life(50 years)
5,Green and low carbon products
6,Easy for installation
7,Saving space

8, Far infrared is good to your health

Compare with the triditional heating mathod, it is a much better product !

Electrical Carbon Crystal Heater

Electrical Carbon Crystal Heater,Carbon Crystal Wall Electric Panel Heater,Carbon Crystal Indoor Use Electric Heater,Electric Convector Heater

Shandong Dexiang Electrical Technology Co.,Ltd , https://www.heater-kerosene.com