1. Tender conditions
The tendering project is Wuhu Power Generation Co., Ltd. production area security access isolation project, the source of funding for its own funds and has been implemented, the tenderer is Wuhu Power Generation Co., Ltd. The project has already met the conditions for bidding and the project is now undergoing an open tender.
2. Project Overview and Bidding Content
The project is located in Hanjiang District, Wuhu City, Anhui Province. The details of the tender are as follows:
Serial number Name Content
1 Safety gate isolation project project in the production area The scope of the project: 1. Set up access control at the relay building and the fifth-generation material storage warehouse. Access control consists of vehicle access control and personnel access control. The vehicle access control adopts license plate recognition system and electric retractable door. The personnel access control adopts two three-roll gates and a face recognition device to access the company's access control system. A new stainless steel column and a canopy are included in the electric door storage area. 2. Four digital high-definition cameras are installed at the relay building and the fifth-generation material storage warehouse to monitor vehicles and personnel respectively, and access the company’s anti-theft video surveillance system. 3, Door #3 removes the original vehicle gear lever, installs the vehicle identification system and the supporting vehicle lever, and the specification and model are the same as the relay building and the fifth generation custody office. 4, # 4 access control transformation, repair the revolving door, repair access control equipment. 5. There are 24 new video surveillance points along the side of the production area, equipped with a digital high-definition camera, and the model number and the camera at the entrance. Access company anti-theft video surveillance system. 6, the installation of equipment related to the civil construction and cable laying work. See technical specifications for details.
3. Bidder qualification requirements
3.1 Bidder's basic qualifications:
3.1.1. There should be legal personality for the independent conclusion of the contract. The person in charge of the unit (legal representative) is the same person or a different unit that has a controlling or management relationship may not bid on the same bid; for bids in the same project where there is mutual restraint (such as supervision and supervision), the person in charge of the unit (Different legal representative) is the same person or different units that have controlling or management relationships may not bid on the corresponding section of the same project.
3.1.2. Should have the same or similar project designing, manufacturing or construction requirements as the tendering target and the corresponding qualifications requirements; have the expertise, capital, equipment and facilities, personnel organization, management capability, performance experience, etc. required for completing the project. No significant quality problems and safety problems have been found during the construction, installation, commissioning and operation, or effective measures have been taken to improve the problems that have occurred.
3.1.3. The company shall have a perfect quality assurance system and must hold a certificate of ISO9000 quality assurance system issued by a qualified organization recognized by the state.
3.1.4. In the past 3 years, there have been no cases of fraudulent bid winning, serious breach of contract, etc. due to their own reasons. The record of serious bad behaviors of suppliers during the non-disposal period of China National Power Investment Corporation or China Power International Co., Ltd.
3.1.5. The business is in good condition. At least 2 years of profit in the past 3 years. Good credit standing and business reputation. Not being ordered to suspend business, property being taken over, frozen or bankruptcy; bid qualification has not been suspended or cancelled. (Bidders are required to provide audited main financial statements and bank credit status documents in the past three years. They are required to provide information on current lawsuits or lawsuits issued by higher authorities or legal affairs departments for the current or nearly three years or no lawsuits. letter.)
3.1.6. The bidder shall have a safety production license within the valid period issued by the safety production supervision and administration department or the construction competent department.
3.1.7. There have been no major safety accidents in the past 3 years, or no major safety accidents in the past 3 years, or no major safety accidents in the past 1 year, or within the last 1 year The unit within the system of the investment group company has not experienced a general production safety personal death accident. (The bidder shall provide the safety accident report approved by the municipal government's production safety supervision and administration department or the construction authority within the past three years.)
3.1.8. Consortium bids are not accepted.
3.2 The professional qualifications that bidders should have:
3.2.1. The bidder shall have at least one of the following qualifications: Grade II and above qualifications awarded by the chief of the building design for the electronic and intelligent engineering contracting, or the safety protection engineering design and construction grade qualification issued by the China Security and Protection Products Industry Association.
3.2.2. The Bidder shall have at least 2 similar project performances in the past 5 years (one of which is the performance of a similar project of the power generation company); the Bidder shall provide a copy of the relevant contract (cover, technical agreement, signature page, etc.) along with the bidding documents. Demonstrate that the bidder meets the bid performance requirements.
4 Qualifications: Post-qualification.
6. Submitting bid documents
6.1 The deadline for the submission of tender documents (the deadline for bid submission, the same below) is at 09:30 on January 18, 2017.
The flame control is accurate and belongs to preheating small convection premixed combustion. Specially designed for western food,with automatic flameout protection of high safety
Steam Oven,Table Ovens,Electric Steam Oven,Home Steam Oven
Xunda Science & Technology Group Co.ltd , https://www.xundatec.com
没有评论:
发表评论